SIAM STEEL SERVICE CENTER PUBLIC COMPANY LIMITEDSET: SSSC🇹🇭 TH

Business Operation · 2025

Corporate Information

Company Name

SIAM STEEL SERVICE CENTER PUBLIC COMPANY LIMITED

Telephone

0-2385-9251-2, 0-2385-9258-66, 0-2754-5845-9

Website

http://www.ssscth.com

Email

hiran@ssscth.com

Dividend Policy

Dividend Policy

The dividend payable policy has fixed at the minimum 50% of net profit of separate financial statement after tax and reserve fund required by law. The payment shall not cause significant effect to the Company’s operations. However, the dividend payment shall also depend upon other factors such as the Company’s performances, financial status, cash flow, business expansion, etc., and subject to the approval of the Company’s shareholders and/or the Board of Directors.

Historical Dividend Payments

This YearLast Year2 Years Ago3 Years Ago4 Years AgoMetricDescription
0.270.320.420.340.37Net profit per share (Baht : Share)Net profit per share (baht : share)
0.170.170.220.190.23Dividend per share (Baht : Share)Dividend per share (baht : share)
00000Dividend stock ratio (Number of original shares: dividend shares)Ratio of stock dividend payment (existing share : stock dividend)
00000Dividend share value per share (Baht : Share)Value of stock dividend per share (baht : share)
00000Total dividend payment value (Baht : Share)Total dividend payment (baht : share)
62.1651.2451.3251.1562.62Dividend payout ratio to net profit (%)Dividend payout ratio compared to net profit (%)

Major Shareholders

Major Shareholders

No.NameShares% Shares
14,323Okaya & Co.,Ltd. (Japan)212,800,00033.25
14,878Siam Steel International Plc156,856,00024.51
14,879Wanchai SiamSteel Group Co.,Ltd.44,262,4006.92

Business Strategies Overview

Vision

Vision Goal and Operation Strategy

Vision “Business operation incorporating good goverrnance with empathy, access ability, and continual collaborative innovation development toward customers’ satisfaction; treating shareholders, customers, business partners, and employees equally; responding to economy, environment, society, and safety; acts collectively against all forms of corruption.”

Objectives

Policy and Nature of Business

Siam Steel Service Center Plc., the affiliate of Siam Steel Group, was established as a Thai-Japanese joint-venture on 30 September 1985. The Company has been set up to manufacture metal components for use in such industries as the construction, automobile, electrical appliance, electronics, furniture industries and etc. operates business of producing and distributing primary steel under the investment between Siam Steel International Plc., and Japanese investors Okaya & Co., Ltd., Mitsubishi Corporation and Toyota Tsusho Corporation.

The Okaya & Co., Ltd., as the Company major shareholder, holds 33.25 percent of the share capital. Okaya & Co., Ltd., is a dealer for steel, machinery, pipe and chemical products. It has no marketing or customer base or running the same business as the Company in Thailand.

Goals

Vision “Business operation incorporating good goverrnance with empathy, access ability, and continual collaborative innovation development toward customers’ satisfaction; treating shareholders, customers, business partners, and employees equally; responding to economy, environment, society, and safety; acts collectively against all forms of corruption.”

Business Strategies

- Supplies only quality and standard products according to the Thai Industrial Standards of Thailand (TIS), Japanese Industrial Standards of Japan (JIS), Underwriters Laboratories Inc. f USA (UL), and British Standards of England (BS). Manufacturing process using quality raw material, high capacity machine with state of the art technology, and standardization for products quality.

- Development toward quality, environmental and occupational health standards to attain Quality Standard System ISO 45001, ISO 9001:2015, IATF 16949:2016, Environment Management System ISO 14001:2015and Energy Management System ISO 50001:2001 from TUV NORD (Thailand) Limited so as to secure the customers’ trust on the Company’s quality products and timely service as required by customers.

- Supplies various products with effective inventory control, sufficient and variety of raw materials to meet customers’ needs.

- Provides various complete services with effective production process enabling timely distribution of steel at the right size and shape to customers.

- Timely product delivery based on proper raw material inventory and production planning that enable effective production process including standard packaging delivered to customers.

- Applies state of the art computer system for operational control, storage and production in particular, to ensure sufficient raw material reserve and minimum process scrap.

- Foreign professionals and engineers working in team to provide consultancy and advices which enable effective selection of quality raw material and production procedures toward obtaining customers’ confidence on Company’s products.

- Provides after sale service with advice from professionals in case of manufacturing defect.

Material Changes & Developments

Material Changes & Developments

YearDescription
1,994
  • The Company increased its capital from Baht 100 million to Baht 224 million. The transaction was approvedand registered with the Ministry of Commerce on 18 May 1994.

  • The Company has been Transformed into a public company under the name of Siam Steel Service Center Public Company Limited. The par value was changed from Baht 100 per share to Baht 10 per share. Meanwhile the registered capital was increased from Baht 224 million to baht 320 million. The approval from/ and registration with the Ministry of Commerce were granted on 8 June 1994.

1,995
  • The Company expanded by establishing factory no. 3 in Zone no.3fEastern Industrial Park in Rayong Province.Theconstruction started in early 1994 and the production and distribution of product commenced in the fourth quarter of 1995.The Company received the highest incentives from BOI.

  • The Company founded and invested in Siam Nippon Steel Pipe Co.,Ltd., which is the manufacturer of special steel pipe for various industries, focusing on auto part industries and downstream industries.The investment proportion was at 6%r Baht7.32 million.

The Company was granted an approval from the SEC to distribute 9.6 million common shares to the public at the price of Baht 120 per share during 10-13 October 1995.

1,996

The SET had listed the Company which allows the Company to trade its shares under the name “SSSC” since 15 January 1996.

2,006
  • At the AGM held on 28 April 2006, the shareholders passed a resolution to increase the Company’s authorized share capital by Baht 160,000,000, from Baht 320,000,000 to Baht 480,000,000 (divided into 48 million shares at Baht 10 par value), to reserve for stock dividend paymentto existing shareholders of the Company.

  • The Company already registered the increase in share capital with the Ministry of Commerce o

    n 1 May 2006 and registered the paid up capital totaling Baht 479,999,910 on 18 May 2006.

  • The SET registered the transaction of the capital increments which allows the Company to trade its shares in the stock exchange since 30 May 2006.

  • Since June 2006, the Company has jointly invested with the Okaya & Co., Ltd. (Japan) to set up Siam Steel Vietnam Company Limited.

2,009
  • The Company decreased its registered share capital by canceling 9 unissued shares at Baht 10 par value, totaling Baht 90 from the existing registered share capital of Baht 480,000,000 to Baht 479,999,910 (divided into 47,999,991 common shares at Baht 10 par value).

  • The Company increased the Company’s authorized share capital by Baht 159,999,970 from Baht 479,999,910 to Baht 639,999,880 (divided into 63,999,988 shares at Baht 10 par value), to reserve for stock dividend payment to existing shareholders of the Company. The Company registered the decrease and increase in share capital with the Ministry of Commerce on 4 May and 6 May 2009, respectively.

  • The Company registered the increase from Baht 479,999,910toBaht 639,997,880with the Ministry of Commerce on29 May 2009

The SET has registered the transaction of the capital increments since 4 June 2009 which allows the Company to trade its shares in the security market.

2,017

At the Ordinary Shareholders’ Meeting held on 27 April 2017, the shareholders passed the resolution to change in par value with a par value of baht 10 each to baht 1 each. The Company, accordingly, had the change in par value registered with the Ministry of Commerce on 18 May 2017.

2,021

The 30 April 2021 AGM has resolved for the amendment of 8 additional objectives of the Company and of the Memorandum of Association from 25 to 33 objectives

Use of Proceeds from Securities Offerings

Is There Money Raised from a Securities Offering Still to Report On?

No

Commitments Made in the Registration Statement

Are There Commitments or Conditions from an Offering or Listing?

No

Group Operating-Structure Policy

Description

The Okaya & Co., Ltd., as the Company major shareholder, holds 33.25 percent of the share capital. Okaya & Co., Ltd., is a dealer for steel, machinery, pipe and chemical products. It has no marketing or customer base or running the same business as the Company in Thailand.

Companies Where the Company Holds ≥10%

Companies (≥10% Holding)

Company NameAddressTelephoneBusiness TypeSecurity TypeSharesPaid-up Shares
Siam Steel Vietnam Co.,Ltd.Phuc Dien Industrial Zone. Mao Dien Commune, Hai Phong City Vietnam(0220)-3630051-52Manufacturing of Blanking, Forming and Bending Steel Parts for Furniture, Elecctrical Appliance, Electronics, Construction and Automotive Industries.Common shares028,000,000

Shareholders with Potential Conflict of Interest

Has Potential-Conflict Shareholder (Y/N)

No

Relationships Among Major Shareholders

Relationship Exists (Y/N)

Yes

Description

Siam Steel International Plc. , Kunanatakul Group holds shares at a ratio of 63.96% shareholders

List of Shareholders

Number of holding shares

(%)


Mr. Wanchai

Kunanantakul

101,936,381


17.19


Mr. Surasak

Kunanantakul

47,450,000


8.00


Mrs.Naphaporn

Hoonthanasevee

47,450,000


8.00


Mr. Surapol

Kunanantakul

47,450,000


8.00


Mrs.Nattaya

Pongphundacha

47,450,000


8.00


Mr. Sittichai

Kunanantakul

47,450,000


8.00


Mrs.Orachorn

Kunanantakul

40,148,274


6.77

Kunanantakul Group

379,334,655


63.96


Shareholders' Agreement

Agreement Exists (Y/N)

No

Shareholding Diagram (Group Structure)

Does the company hold shares in other companies?

Yes

Subsidiaries

Company NameJuristic Persons / Holders
Siam Steel Vietnam Co.,Ltd.SIAM STEEL SERVICE CENTER PUBLIC COMPANY LIMITED · Voting rights percent: 90.0 · Shareholding proportion percent: 90.0

Income Structure

Product / Service Income

CategoryDescriptionThis YearThis Year %Last YearLast Year %2 Years Ago2 Years Ago %
Total revenue from operationsTotal revenue from operations4,689,4831004,978,1161005,395,207100
Steel Sheets for Sale3,462,64873.843,404,76768.393,881,54871.94
Cutting Service309,8756.61300,7606.04312,7015.8
Construction Parts690,68914.731,027,68520.64970,87918
Press Product160,8993.43179,5693.61157,9592.93
Transportation65,3721.3965,3351.3172,1201.34
OtherOther000000

Export Income

CategoryDescriptionThis YearThis Year %Last YearLast Year %2 Years Ago2 Years Ago %
Total revenueTotal revenue from operations4,689,4831004,978,1161005,395,207100
DomesticDomestic4,689,4831004,978,1161005,395,207100
InternationalInternational000000

Other Income

Operating Other IncomeNon-Operating Other IncomeShare of Profit
1710 · As of year: 0.0 · Description: Total other income · As of yesteryear: 0.0 · As of year before yesteryear: 0.0 · 1711 · As of year: 0.0 · Description: Other income from operations · As of yesteryear: 0.0 · As of year before yesteryear: 0.01712 · As of year: 0.0 · Description: Other income not from operations · As of yesteryear: 0.0 · As of year before yesteryear: 0.01713 · Description: Share of profit

Product / Service Characteristics

Business Type

3114

Business Groups

Business GroupDescription
1.INDUSTRIAL STEEL PRODUCTS 2.CONSTRUCTION SUPPLY 3.SPECIAL PRODUCTION AND SERVICES
  1. Industrial steel products

Including steel coil cutting for distribution and cutting service on customers’ steel into cutting sheet and slitting coil which are consider the main products generating income to the Company.

  • Steel cutting for distribution using imported steel and steel purchased from domestic sources for custom cutting or transforming into sizes as required for subsequent distribution as ordered.

  • Steel cutting service n customer’s steel or transformed into size as required, the Company’s income generated in this regard account only for cutting service.

The Company supplies steel at every size and type using modern and high efficiency machine to transform steel into steel sheet and slitting coil at 0.25-12 mm thick and up to 2,000 mm wide with no limit in length. In connection to this, two types of products are produced.

Cutting Sheet using slitting coil with specified width and have it cut to the length as required by customer.

Slitting Coil using Mother Coil as specified by customer and cut along the width with custom length and rolled back as slitting coil, subsequently, distributed to customer for further processing into various steel parts.

The Cutting Sheet and Slitting Coil are used in downstream industries i.e. automotive industry, electrical appliances & electronics industries, furniture industry and other related industries using steel as raw materials in manufacturing process.

2. CONSTRUCTION SUPPLY

The Company imports coated steel for production and installation services for construction industries. Coated corrugated sheet is used as materials for internal and external construction. The Company imports different types of coated corrugated steel to be pressed, using modern technology, into different shapes and sizes such as roofing, roof frame, siding, ceiling, rouver, roof fan, deck plate, and etc. The products are durable, aesthetic, light, quick to install, and can be made from various kinds of coated corrugated sheet including:

  • Aluminized Coating,

  • Galvanized Coloured,

  • Aluzinc Coloured,

  • Aluzinc and Galvanized.

Steel products for use in construction industry, hence, steel coil is formed into shap as designed and installed, in most cases by the Company, in some cases the forming and installing are operated by the Company as per customer’s design.

The Company also produces various structure steel including hollow steel for construction, corrugated steel bar, round tapered light pole, and etc.

  1. SPECIAL PRODUCTION AND SERVICES

Including steel fabrication for finished and semi-finished products used in various industries, and steel pipe transformation for distribution to customers as size specified.

The Company has blanking and forming lines completed with press and bender machines to form steel sheet into various semi-finished and finished products such as steel parts for automotive, electrical appliances, steel coil core, and slitting coil packaging. The varity of products and services enables the Company to facilitate customers especially those who look for full service. Steel forming services include

Steel fabrication for distribution using the Company’s steel sheet as specified by customer, the outputs are subsequently sale to customer, pricing based on steel inputs and services.

Fabrication service using customer’s steel sheet transformed into shape as required. In this regard, customer pay for service charge. The Company also distributes custom cut steel pipe with thickness, diameter and length as required.

Steel products as per customer’s job order are used as raw material in various downstream industries.

Construction industry:

For roofing, roof structure, metal deck, metal ceiling, metal window and door frame, metal railing, metal electronic column and metal bridge

Automotive industry:

For manufacturing of car, van, truck, motorcycle, bicycle, wheels vehicle, aircraft, train and tram.

Electronic Industry:

For manufacturing of dynamo, washing machine, grille machine, toaster, vocal and motion recorder, water heater, air conditioner, television, computer, refrigerator, stereo, electrical rice cooker, electrical calculator, electronic oven and electrical fan

Furniture Industry:

For office furniture, furniture in academic institute, furniture in bank and furniture in shopping mall such as table, chair, screen, safety box, metal cabinet, shelf and stage

Other Industries:

For any industries using steel parts as required by the customers.


Research & Development

Has R&D Policy (Y/N)

No

R&D Cost — Label

Research and development (R&D) expenses over the past 3 years (Million Baht)

R&D Cost — This Year

0.0

R&D Cost — Last Year

0.0

R&D Cost — 2 Years Ago

0.0

Assets Used in the Business

Permanent Assets — Description

The Company’s fixed assets which are free from encumbrances as of 31 December 2025.

Type Assets

Book Value (Million Baht)

Land, Factory 1 Samutprakarn

63.98


Land, Factory 2 Samutprakarn

196.28


Land, Factory 3 Rayong

151.83


Factory Building, Samutprakarn

129.30


Factory Building, Rayong

129.74


Machine

249.98


Intangible Assets — Description

-

Has Subsidiaries Investment Policy (Y/N)

Yes

Subsidiaries Investment Policy — Description

Investment and Management Policy

The Company defines the policy on investment and management of its subsidiaries as follows:

  • Invests in main businesses or the business connected with the SSSC.

  • Well prepares for trade opportunities, risks, and others before making an investment.

  • Appoints representatives as authorized committee membersto oversee the management of its subsidiaries to ensure the management is in accordance with the Company’s policy and plan.

  • Regulary receives quatery report of performances from the subsidiaries.

  • Holds joint meeting between the Company and its subsidiaries at every quarter to acknowledge the performances, issues that required attention, collective planning and goal setting.

Marketing Policy & Competition

Reporting Mode

3116

Per-Business-Group Breakdown

Marketing PolicyIndustry & Competition

MARKETING

  1. Customers’Characteristics and their Relationship with the Company

Customers are manufacturers in various industries using steel as raw material in manufacturing process.

The Company has regular customers and others of large, medium, and small industries as well as those in construction industry including construction firm, proprietor, government agency, Thai-Japanese joint venture construction company, and etc.

Customer’s relationship includes sale promotion through provision of advice and consultancy in relation to the products by both in-country and foreign steel professionals. Whereas the engineering team and skilled technicians provide professional control and inspection, based on the Company’s long experience in steel manufacturing, to ensure products quality meet with standards and customers’ requirements. Most customers have long relation and good cooperation with the Company. The Company has no special reliance on any customer as none of them has business deal exceeding 30% with the Company.

  1. Distribution Channels

Distribution to Manufacturers

Most of the Company’s products are distributed to manufacturers of large and medium industries consuming large and certain amount of steel on a regular basis. In this regard, customers would order the amount required 1-2 month in advance so that the Company would be able to reserve for timely use. In the case of sale, the credit term is 1-3 month depending on individual customer by either the Company saleperson approaches the prospective buyer or vice versa.

Distribution to Construction Company

The distribution has been to mainly large and medium Thai-Japanese joint venture construction companies operating full construction service. Other customes include industrial plants and warehouses. In this regard, the Company sells products as per the project operated via the Company maketing personnel.

Besides regular customer, the Company also sale product to other customers e.g., industrial plant, warehouse, gymnasium, gas station, building, school, hospital, hotel, mall, residential, hangar; via construction company, architect, design company, or project owner, or government agency for custom design and material inputs.

  1. Pricing Policy

The following factors are taken into consideration.

  • Steel capital including currency exchange and interest rates

  • Production procedures, the more procedures required the higher the price.

  • Market price is used as reference for Company pricing in order to maintain competitive advantage in the steel industry.

Business Review and Competition

In 2025, steel consumption is expanded slightly, driven by increased government construction projects. However, the overall steel industry still faces weak demand and pressure from low-cost imports such as China, which is pushing domestic prices down. Domestic car production is expected to continue contracting, and steel prices are likely to continue declining.

The continuous decline in Thailand's steel production volume is primarily due to the influx of cheaper oversea steel, which has a price advantage. This has resulted in the need to clear the surplus steel supply, which exceeds demand, and is expected to be further flooded by oversea steel due to the slow recovery of the real estate market. Many steel industry operators are experiencing losses, including producers facing declining sales due to falling prices and reduced production volumes, as well as intense competition from cheaper oversea steel.

For the 2026 forecast, the risk factors in both the domestic and global economies that may affect the use of steel sheets include:

  • Domestic demand for steel

  • Price competition

  • Increased competition from domestic and foreign competitors

  • Economic and political uncertainty

  • il price trends

  • Exchange rate fluctuations

  • Excess raw materials

  • Geopolitical risks

  • Foreign trade policies and trade countervailing measures between the United States and China

  • War

  • Impacts of climate change

  • Environmental measures and emission reduction policies of major steel-producing countries

In the future, the Thai steel industry is expected to become more environmentally friendly, following global trends aimed at achieving carbon neutrality. The target of reducing greenhouse gas (GHG) emissions has led various countries to implement more environmental policies and regulations. Currently, some businesses are already preparing, such as measuring GHG emissions and increasing the proportion of clean energy in production processes. This will give them a competitive advantage in the market, opportunities to add value to their products, and expand their customer base. Furthermore, the Thailand Taxonomy Phase II, which groups industries to enable the financial sector to design and offer financial products and services to support businesses on their greener path, provides manufacturers with plans to reduce GHG emissions with greater access to financial products for carbon neutrality adaptation.

Summary of the industry related to steel parts products

Automotive Industry

In 2025, production volume of Thailand's automotive industry dropped, driven by a decline in the domestic market. This is due to persistently high levels of non-performing loans and weak consumer purchasing power, coupled with stricter lending policies by financial institutions. Exports are also expected to drop due to trade barriers and market competition from Chinese car exports resulting from the trade war.

Risks to the Thai Automotive Industry

  • Intensifying trade barriers: The USA trade policy impacts supply chain changes, affecting Thailand, particularly the USA's plan to impose tariffs on imported automobiles worldwide.

  • The transition to Battery Electric Vehicle (BEV) technology will affect the demand for Thai automotive parts, especially those from gasoline-powered vehicles being replaced by BEVs. It is estimated that by 2025, if automakers need to meet the EV 3.0project requirements, they may need to produce more than 100,000BEVs. While some Thai automotive parts can be used in BEV production, this is expected to be very small, as parts are still imported from China for assembly.

  • With increasing competition from Chinese automobiles and parts both domestically and in export markets, China needs to find more export markets, both to Thailand and other Thai trading partners, due to the escalating trade war.

Factors that may affect the growth of the automotive business are as follows.

  • Investment in industrial estates, the expansion of industrial estates and foreign investment support the growth of the automotive parts industry, especially investment in new technologies, modern manufacturing, increased efficiency and reduced production costs, as well as developing the capacity to produce parts for electric vehicles.

  • Labor skills development, training and developing labor skills to align with new technologies is essential to support industry changes.

  • International cooperation, joint ventures with foreign companies can help increase competitiveness and access new technologies.

  • Domestic economy, weak purchasing power and overall sales volume may be a problem.

Fluctuations in the global economy, such as trade conflicts and exchange rate fluctuations, can impact exports and production costs in the automotive parts industry.

The automotive industry continues to face several challenges. Adaptation and developing competitiveness will be a key to maintaining and increasing market share in the future.

Construction Industry

The overall Thai construction industry in 2025 is remained "stable." Growth will be primarily driven by the government construction sector, while the private sector is expected to remain sluggish.

Main Trends

  • Government sector construction shows slight growth. The value of government sector construction is projected to increase by approximately 1%, reaching 860 billion baht. This is supported by the continued operation of large-scale infrastructure projects (Mega projects) and the initiation of new project bidding. However, uncertainty remains due to the reduced budget allocation for fiscal year 2025 compared to the previous year.

  • Private sector construction is expected to decrease continually, primarily due to the sluggish housing market and the fact that confidence has not yet fully recovered.

  • Cost Challenges, businesses continue to face challenges from volatile construction material prices, particularly the influx of steel from China into the market, as well as rising energy and labor costs.

  • Technological Adaptation, both government and private sector businesses are focusing on adopting modern technologies and machinery to increase efficiency and address industry challenges.

Planning investment in the Thai construction industry for 2025 should consider key trends indicating that the market will be primarily driven by the government sector, while the private sector continues to face ongoing challenges.

Investment Trends to Watch

  • Government infrastructure projects are a key driver of growth. Investments related to Mega-projects, especially in the Eastern Economic Corridor (EEC) and various transportation projects (such as electric trains and expressways), remain highly potential. Entrepreneurs should prepare themselves to bid on these projects.

  • Diversify risk into related businesses. Given the continued sluggishness in the residential real estate sector, investors may consider investing in commercial real estate, logistics, warehousing, data centers, or related services, which are expected to recover as infrastructure development progresses.

  • Investing in technology and innovation, adopting modern technology and machinery will increase efficiency and reduce costs in the long run, which is essential to cope with rising labor and construction material costs.

Investment planning strategy

  • Focus on liquidity and cost management, with the volatility of construction material prices (e.g., steel) and energy costs, entrepreneurs must prioritize efficient cost management and maintaining financial liquidity.

  • Seeking Partnerships, building networks or partnering with large companies capable of undertaking mega-projects can open up opportunities for small and medium-sized businesses.

  • Adapting to Sustainability, climate change and Net Zero goals are increasingly influencing the industry. Entrepreneurs that adapt or invest in environmentally friendly construction materials and processes will have a competitive advantage in the future.

  • Closely monitor government policies. The 2026 budget framework is uncertain and subject to change. Regularly following government news and policies will help us adjust investment plans in a timely manner.

In summary, investments in 2025 must be cautious and focus on projects with secure funding sources, especially government Mega-projects, and investments that improve efficiency and reduce costs in the long term.

Electrical and Electronics Industry

By 2025, the production volume of electrical appliances industry is decline. Adaptations to meet changing consumer demands focus on developing products with smart home functions, increased attention to environmental considerations (ESG), and the development of technologies such as embedded electronics. This industry is heavily reliant on exports, with the main export markets being the United States of America and the European Union. Factors affecting this industry include the global economic situation, geopolitics, international conflicts, and technological advancements that must be adopted to enhance competitiveness.

Currently, Thai electrical appliance manufacturers face increasing competition in both domestic and export markets from the influx of Chinese electrical appliances into ASEAN, one of their main export markets. This is because electrical appliances are one of the items where ASEAN has eliminated import tariffs under the FTA, making Chinese electrical appliances cheaper. Meanwhile, the domestic market is being flooded with Chinese electrical appliances through online channels, both from Thai distributors and directly from Chinese traders and manufacturers. This is reflected in the increasing proportion of ASEAN's electrical appliance imports from China and the growing proportion of domestic sales of Chinese electrical appliances.

The electronics industry is showing positive trends. Entrepreneurs must continuously improve and develop their products to meet the increasing demand for high-tech goods. The following approaches can be adopted by the electronics industry to adapt:

  • The industry must change towards environmentally friendly practices, selecting environmentally sustainable materials, reducing the use of hazardous chemicals, and managing e-waste properly.

  • The development of highly skilled labor should be supported by updating curricula to better meet current labor market demands.

  • Promoting investment in research and development and creating supply chains requires collaboration between the government and private sectors to drive the development of higher-value primary electronics products.

Furniture Industry

The domestic steel furniture industry, encompassing both large and small manufacturers, produces similar or identical products. However, the use of alternative materials to steel, advancements in production technology, and the development of distinctive and superior designs have resulted in a wider variety of quality, styles, and prices. This allows consumers to choose products that best suit their needs, leading to a decline in the steel furniture market.

The furniture industry tends to limited growth. Export markets have growth potential, supported by a recovery in orders from the USA, Europe, and CLMV countries, as well as penetration into new markets in the Middle East. The domestic market is expected to slight growth, but fragility in domestic purchasing power due to household debt and weak consumer spending is putting pressure on the market. Competitiveness is hampered by the entry of new manufacturers and competitors in the region, such as Vietnam and Indonesia, as well as dumping by Chinese goods.

Factors affecting the Thai furniture industry

  • Weak domestic purchasing power may cause consumers to delay furniture purchases

  • High competition and the increasing likelihood of market competition from foreign furniture brands

  • High production costs, including potential wage increases driven by minimum wage hikes, will undermine business profitability.

  • Other risk factors that may impact business operations include global trade policies, a strengthening Thai baht, geopolitical conflicts, and increased import tariffs in other countries.

Procurement of Products & Services

Reporting Mode

3117

Procurement (Overall)

Source of Raw Materials

The Company purchases raw materials domestically and imports. As some customers require good quality product, the Company imports raw materials from the 2 Japanese steel manufacturers: Nippon Steel Corporation, and Noppon Steel Nisshin Co.,Ltd. who produce good quality steel. The importing is made via dealer, the Okaya & Co.,Ltd. The domestic purchasing from the NS-Siam United Steel Co.,Ltd. is made via the Siam Suriya Co.,Ltd.

As for the imports from Japan, due to the steel manufacturer’s policy indicating the sale of steel by manufacturer shall be made via steel dealer by which the dealer shall receive benefit in terms of commission from the steel manufacturer. In the case of the Company being joint venture and long time trade partner with the Okaya & Co., Ltd., the purchasing via the company is made from time to time and without any written agreement concerning purchasing orders.

Raw Material Acquisition (Overall)

Types of raw material

  1. Hot Rolled Steel Sheet is flat shape steel or flat product used in various industries such as structural steel industry, warehouse, automobile, electrical equipment parts, container parts.

  2. Cold Rolled Steel Sheet is the transformed product of hot rolled steel sheet which mainly used in car, electrical appliances, and future industries; and as raw material in coated steel production.

  3. Electro Galvanized Steel is good for its anti-rust and corrosion resistance as well as for paint spraying work. It is used in electrical appliances industry e.g. washing machine, refrigerator, air conditioner, furniture, architectural decorations; in car industry e.g. body, air filter, gasoline tank; and in making other works e.g. licence plate, traffic sign, and containers.

  4. Hot Dip Galvanized Steel is antirust and corrosion resistance which can be used by itself and not required paint spreying. It is good for producing electrical equipment e.g. future, refrigerator, freezer, air conditioner parts, electrical equipment parts, air duct equipment, trough; and for construction industry e.g. roofing, architectural decorations.

  5. Aluminium Coated Steel is antirust, corrosion-heat resistant, and heat reflective. It is generally used to produce heat resistant equipment and parts i.e. exhaust pipe, oven equipment, gas stove, paint baking room, heat pipe. It is also used as floor and roof slabs for factory building and others.

  6. Terne Sheet is steel sheet coated with an alloy of lead and tin to inhibit corrosion and rust especially around the area attached to chemical substances such as oil, paint, tinner. It is good for paint spraying mostly in car equipment i.e. gas tank, radiator, air filter, oil filter. It is also used to make electrical equipment and parts.

  7. Silicon Steel, with its low power loss coefficient, it is generally used in the electrical appliance industry e.g. core motor, transformer.

  8. Colored Sheet is steel submerged in a bath of motten hot zinc to prevent rusting and corrosion. As no paint spraying is required before use, this steel type is best for making floor and roof of the factory building as well as for electrical appliance parts i.e. washing machine, refrigerator.

  9. Stainless Steel is antirust and corrosion resistant which makes it suitable for kitchen tools and other appliances e.g. elevator, pipe, auto parts that make the car aesthetically pleasing. It is also used as raw materials in packaging and spare parts e.g. nuts, screws, connectors production.

Production Policy (Overall)

The following factors are taken into consideration.

  • Steel capital including currency exchange and interest rates

  • Production procedures, the more procedures required the higher the price.

  • Market price is used as reference for Company pricing in order to maintain competitive advantage in the steel industry.

Distributors (Overall)

The Company purchases raw materials domestically and imports. As some customers require good quality product, the Company imports raw materials from the 2 Japanese steel manufacturers: Nippon Steel Corporation, and Nippon Steel Nisshin Co.,Ltd. who produce good quality steel. The importing is made via dealer, the Okaya & Co.,Ltd. The domestic purchasing from the NS-Siam United Steel Co.,Ltd. is made via the Siam Suriya Co.,Ltd.

As for the imports from Japan, due to the steel manufacturer’s policy indicating the sale of steel by manufacturer shall be made via steel dealer by which the dealer shall receive benefit in terms of commission from the steel manufacturer. In the case of the Company being joint venture and long time trade partner with the Okaya & Co., Ltd., the purchasing via the company is made from time to time and without any written agreement concerning purchasing orders.

Number of Raw-Material Distributors (Overall)

2

Production Capacity (Overall)

ItemUnitUsedCapacity
Siam Steel Service Center Public Company LimitedTon60600,000

Domestic/Overseas Purchase Proportion (Overall)

Raw MaterialSource CountryValue
steel (thousand baht)Japan2,746,172

Projects Under Construction

Has Projects Under Construction (Y/N)

Yes

Description

Undelivered Work

As of 31 December 2025, the Company’s work with an approximate value of 292.33 Million Baht has yet to deliver. The undelivered are mainly the products being installed under the construction projects.

Total Projects

387718705

Total Project Value

387718705.0

Recognized Value

292327209.35

Remaining / Unrecognized Value

95391495.65

Projects

Project NameDescriptionValueIncome %Est. YearsEst. Months
SIAM DENSO PH.3
SIAM DENSO PH.3
75,000510
HI-TECH RUBBER NEW FACTORY
HI-TECH RUBBER NEW FACTORY
3,170,000510
FUJIKURA RENO. ROOF (BLDG.4)
FUJIKURA RENO. ROOF (BLDG.4)
7,150,0001010
PCG WET PLANT 4
FUJIKURA RENO. ROOF (BLDG.4)
10,759,2002010
NEO EXPANSION 2-HOUSEHOLD
NEO EXPANSION 2-HOUSEHOLD
24,500,0004010
NMB.(FOAM TANK & CO2 YARD)
NMB.(FOAM TANK & CO2 YARD)
260,0005010
OMEGA BANGNA
OMEGA BANGNA
86,000,0005710
PTT GC12(DEMO.TILE ROOF W700BL
PTT GC12(DEMO.TILE ROOF W700BL
6,230,0006010
MICHELIN SIAM (DOUBLE ROOF)
MICHELIN SIAM (DOUBLE ROOF)
1,550,0006010
ROHM (CHANGE ROOF FACTORY E)
ROHM (CHANGE ROOF FACTORY E)
4,550,0006010
FUJIKURA RENO. ROOF (BLDG.3)
FUJIKURA RENO. ROOF (BLDG.3)
7,150,0006010
TID NEW FACTORY
TID NEW FACTORY
5,900,0007010
REX-T (ADD. OPENING FLASHING)
REX-T (ADD. OPENING FLASHING)
110,0007010
FTM (ROOF WALKWAY OFFICE)
FTM (ROOF WALKWAY OFFICE)
320,8007010
PANASONIC NAVANAKORN (CONNECT
PANASONIC NAVANAKORN (CONNECT
960,0007010
TID (DECK PLATE)
TID (DECK PLATE)
1,200,0007510
PONGPARA RUBBER AOM-NOI(GUTTER
PONGPARA RUBBER AOM-NOI(GUTTER
1,000,0008010
HONDA AUTO MOBILE TRC(ROOF)
HONDA AUTO MOBILE TRC(ROOF)
1,050,0008010
SMILE (ADDITION)
SMILE (ADDITION)
400,0008010
OKUNO OFFICE BUILDING
OKUNO OFFICE BUILDING
750,0008010
PANASONIC SAMRONG (RENOVATION)
PANASONIC SAMRONG (RENOVATION)
1,525,0008010
BSTMT AC BLDG.(DEMO&RE-INSTALL
BSTMT AC BLDG.(DEMO&RE-INSTALL
90,0008010
NIKKAN PERMANENT LIFE LINE
NIKKAN PERMANENT LIFE LINE
300,0008010
BSTMT AC BLDG.(ADD.DOOR FL.
BSTMT AC BLDG.(ADD.DOOR FL.
22,0008010
BCM(BANGKOK CAN)RENO. SIDING
BCM(BANGKOK CAN)RENO. SIDING
550,0008010
NIKKAN(SCRAP YARD&COMPRESSOR)
NIKKAN(SCRAP YARD&COMPRESSOR)
44,0008010
AAT (NEW TEST AREA &
AAT (NEW TEST AREA &
550,0008010
MKCT (CHANGE PROFILE LOUVER)
MKCT (CHANGE PROFILE LOUVER)
137,0008010
LPP
LPP
316,0008510
THACOM (CHANGE ROOF)
THACOM (CHANGE ROOF)
2,200,0008510
THAI YOKOREI NEW FACTORY
THAI YOKOREI NEW FACTORY
21,000,0008510
MKCT (CHANGE ROOF)
MKCT (CHANGE ROOF)
4,466,0008510
SIAM MARUZEN SHOWA NEW WH.
SIAM MARUZEN SHOWA NEW WH.
8,960,0008510
HONDA AUTO MOBILE TRC (DECK)
HONDA AUTO MOBILE TRC (DECK)
650,0009010
FURUKAWA FITEL NEW FACTORY
FURUKAWA FITEL NEW FACTORY
5,560,0009010
TID (ADD. WORK)
TID (ADD. WORK)
50,0009010
STANLEY FACT.1(CHANGE ROOF)
STANLEY FACT.1(CHANGE ROOF)
9,500,0009010
TOYOTA BAAN-PHO (DOUBLE ROOF)
TOYOTA BAAN-PHO (DOUBLE ROOF)
8,600,0009010
REX-T (FLASHING)
REX-T (FLASHING)
85,0009010
REX-T(FLASHING COVER FIRE PUMP
REX-T(FLASHING COVER FIRE PUMP
15,0009010
JSP MODIFY ROOF
JSP MODIFY ROOF
950,0009010
FTM PERMANENT(OFFICE DOUBLE S.
FTM PERMANENT(OFFICE DOUBLE S.
90,0009010
NIKKAN(WALKWAY & LAMINATE RM.)
NIKKAN(WALKWAY & LAMINATE RM.)
32,0009010
YAKULT (WATER LEAK)
YAKULT (WATER LEAK)
69,9109010
ELASTOMIX(DEMO.&INSTALL GUTTER
ELASTOMIX(DEMO.&INSTALL GUTTER
200,0009010
SDM (OPENING HOOD FLASHING)
SDM (OPENING HOOD FLASHING)
172,0009010
SEKISUI TP2000(ADD. FLASHING
SEKISUI TP2000(ADD. FLASHING
30,0009010
OKUNO (ADD.EDGE INSULAITON)
OKUNO (ADD.EDGE INSULAITON)
40,0009010
TBSM(ADD.REPAIR COVER ROOF)
TBSM(ADD.REPAIR COVER ROOF)
115,0009010
LPP
LPP
1,456,0009510
SOLAR ROOFTOP PANASONIC SPT
SOLAR ROOFTOP PANASONIC SPT
14,280,0009510
SBS (ADDITION WORK)
SBS (ADDITION WORK)
715,9509510
SOLAR ROOFTOP PCM PROCESSING
SOLAR ROOFTOP PCM PROCESSING
11,600,0009510
NEO-2 (ADD. CONVEYOR BRIDGE)
NEO-2 (ADD. CONVEYOR BRIDGE)
259,1009510
FTM(ADD.CARPARKING)+ S-11819
FTM(ADD.CARPARKING)+ S-11819
482,0009510
GS BATTERY(GRID SECTION CON#11
GS BATTERY(GRID SECTION CON#11
380,0009510
MATTEL (CONNECTION BRIDGE)
MATTEL (CONNECTION BRIDGE)
115,0009510
BRIDGESTONE AC BUILDING(BTMT)
BRIDGESTONE AC BUILDING(BTMT)
19,800,0009510
TYE-S ALUMINUM (WALK WAY)
TYE-S ALUMINUM (WALK WAY)
363,0009510
NMB NEW FACTORY PH.11
NMB NEW FACTORY PH.11
12,550,0009510
SEKISUI TP2000 PROJECT (ROOF)
SEKISUI TP2000 PROJECT (ROOF)
6,472,0009510
REX-T FACTORY
REX-T FACTORY
7,000,0009510
YACHIYO (FIRE PUMP)
YACHIYO (FIRE PUMP)
390,0009510
NIKKAN NEW FACTORY NO.3
NIKKAN NEW FACTORY NO.3
2,900,0009510
FTM PERMANENT OFFICE
FTM PERMANENT OFFICE
3,969,5759510
FTM (ROOF RADIAL WALK WAY)
FTM (ROOF RADIAL WALK WAY)
70,0009510
DAIKIN MOLD & JIG (ADD.WORK)
DAIKIN MOLD & JIG (ADD.WORK)
40,0009510
SEKISUI TP2000(ADD.SIDING)
SEKISUI TP2000(ADD.SIDING)
41,0009510
BSTMT(ADD. ROOF FOR INSPECTION
BSTMT(ADD. ROOF FOR INSPECTION
468,0009510
UTAC AT BUILDING
UTAC AT BUILDING
1,240,0009510
REX-T (FLASHING INSIDE OFFICE)
REX-T (FLASHING INSIDE OFFICE)
100,0009510
KUBOTA (ROLL OFF BOX STAGE)
KUBOTA (ROLL OFF BOX STAGE)
600,0009510
BSTMT (PATCHING ROOF)
BSTMT (PATCHING ROOF)
99,0009510
SUS REPAIR ROOF V500
SUS REPAIR ROOF V500
1,300,0009510
THAI SYNERGY(ADD.AMAZON
THAI SYNERGY(ADD.AMAZON
70,0009510
PANASONIC SAMRONG (DECK PLATE)
PANASONIC SAMRONG (DECK PLATE)
66,0009510
GMT (ADD. OPENING)
GMT (ADD. OPENING)
25,0009510
SUNSWEET (4 BUILDING)
SUNSWEET (4 BUILDING)
4,348,0009810
PEPSI WAREHOUSE EXPANSION
PEPSI WAREHOUSE EXPANSION
10,680,0009810
PONGPARA RUBBER AOM-NOI(DEMO.)
PONGPARA RUBBER AOM-NOI(DEMO.)
4,750,0009810
SBS(WH.1 CONVERSION)
SBS(WH.1 CONVERSION)
266,5309810
PONGPARA RUBBER(AOM-NOI)
PONGPARA RUBBER(AOM-NOI)
2,900,0009810
SOLAR ROOFTOP SCG NICHIREI
SOLAR ROOFTOP SCG NICHIREI
20,933,6409810
DAIKIN MOLD&JIG MEASUREMENT
DAIKIN MOLD&JIG MEASUREMENT
1,750,0009810
LINFOX FIVESTAR NEW WAREHOUSE
LINFOX FIVESTAR NEW WAREHOUSE
22,000,0009810
CANON CHEMICAL ROOM(CHT-11)
CANON CHEMICAL ROOM(CHT-11)
247,0009810
BSTMT (DEMO. FOR SIDING)
BSTMT (DEMO. FOR SIDING)
39,0009810
SUNSWEET (ADD. ROOF&SIDING)
SUNSWEET (ADD. ROOF&SIDING)
270,0009910
NEXT-01 DATA CENTER(ADD.SIDING
NEXT-01 DATA CENTER(ADD.SIDING
1,755,0009910
RISO (CHANGE SKYLIGHT)
RISO (CHANGE SKYLIGHT)
1,000,0009910
SIAM DEL MONTE EXTENSION
SIAM DEL MONTE EXTENSION
524,0009910

Debentures & Bills of Exchange

Has Debentures (Y/N)

No

Convertible Securities

Has Convertible Securities (Y/N)

No

Contents